Wednesday, November 24, 2010

2000 Ford Windstar 3.8L (bearing shot.. somewhere among 7 pulleys)?

How much play might a power steering pump pulley have?



I changed the belt and idler pulley(no change). The sound I hearing can get too loud at times to isolate the bad bearing. Serpentine drives: Crank, water pump, alternator, power steering, idler, and tensioning idler. Any ideas?2000 Ford Windstar 3.8L (bearing shot.. somewhere among 7 pulleys)?
i would get a can of wd40 and spray each one and listen for the noise to stop2000 Ford Windstar 3.8L (bearing shot.. somewhere among 7 pulleys)?
take the belt off and check each pulley for play and spin the p/s a/c idler and tensioner. you should be able to tell which one is the problem. most likeky the idler or tensioner2000 Ford Windstar 3.8L (bearing shot.. somewhere among 7 pulleys)?
I have seen the cam synchronizer go bad and thought it was a pulley problem. it sounded like the noise was right there at the belt. this was also a 2000 windstar w/3.8. good luck.

JEEP YJ 4.2 -1988 - ENGINE question?

I just got almost for free Jeep 1988 4.2 . Did not run . I started changed fluids , oil etc , and engine is knocking like woodpicker .

To me soung like broken lifter ( my friends have same opinion ).

I know I shoud change camshaft and lifters . My question is -

-do I need remove engine head to do this job?

-maybe better idea is to buy another engine from junk-yard instal , use for while and in same time rebiuld this knocking ? -Any idea how much cost used complite engine -some links?

-how about remanufactired engines -avaliable on line for about $1400 ? -Are they OK -is it good price ?

I never had Jeep before , I like this vehicycle a lot , I would brigh this vehicycle to life again .

I know how to do most job , I just need good advices .

I will be happy if someone will give me some links about problem above , some advices .

How much will cost me to buy all parts needed to rebiuld engine by myself ?



Another problem with Jeep. I have automatic transmition -is OK-but when I stop on red light many times engine dies . Normal RPM is about 600 as should be . I did not do tune-up yet . Maybe is needed .

What is your opinion about this problem ?

Maybe I need change fuel pump ? Or maybe is some adjustment on this pump ?



And last question , power stering . When engine is warm , power steering does not work as good as when is cold . Is there some adjastment on power steering pump ?



Any help is needed . Thank you .JEEP YJ 4.2 -1988 - ENGINE question?
Sounds to me like you might have a cracked flex-plate which can simulate the exact same noise as a lower engine knock. This could also be causing you transmission problem i would remove the inspection cover on the transmission bell housing spiflex-platexplate around and check for any cracks. On the power steering issue sounds like the fluid is reaching its boiling point after it warms up which it could be contaminated with water or something since it hasent been running. I would recommend draining the fluid and refilling it and also add some lucas power steering fluid and see what happens.JEEP YJ 4.2 -1988 - ENGINE question?
Hi

For your power steering, any adjustment would be on the steering box

And I think your rpm`s should be up to about 850. For the knock, put in two qt/liter of transition fluid in the oil. (Take out about 2 qt) It is

mostly detergent and may clean the lifters. Its worth a try ! And leave

it in for a few days.

1987 Toyota Celica GT?

I'm looking for my first car, and I found a 1987 Toyota Celica GT 5 speed for $700 OBO.



The body is in pretty good shape, but the owner says it needs a tune up, oil change, and possibly a power steering pump.



It also has no radio.



The price of the car is not on KBB or Edmunds since it is older that 1990, how much would be a good offer to make on this car and how much do you expect the repairs to cost?1987 Toyota Celica GT?
Buy a newer car between 1998 and 2004. I Woudnt buy something from the 80's. Also, because of all the repairs it needs.



Do you know the buyer? He could just be selling it to you to get it off his hands and it dosent work and is mice infested.1987 Toyota Celica GT?
you should offer about 300 dollars because you are looking at at least 600 dollars in repairs.

its not a good deal.1987 Toyota Celica GT?
650$ and the repairs will cost about 120$1987 Toyota Celica GT?
Make certain the headlight doors open. Make sure it drives straight, doesn't overheat, and that there's no clicking sound when turning.



The 3S-FE is a pretty dayum reliable engine. If it's not belching smoke and all the above stuff works, $700 is an okay price. I'd offer $500 but have the extra 2 $100 bills in my pocket in case he refuses.

How to reinstall the serpantine belt on a 1998 chevy s10 blazer 6cyl 4.3L 4x4?

im changing the water pump cannot seem to get the belt tight i have tried every possible way its the same belt that came off only one belt runs everything the altenator is on top pass side A/C comp top driver side Power Steering pump below A/C tensioner below Altenator belt runs you can also email your answer to battlegroundpb@yahoo.comHow to reinstall the serpantine belt on a 1998 chevy s10 blazer 6cyl 4.3L 4x4?
I ran into that same problem on a p-chassis 4.3L it was like I was in the twilight zone or stuff. It didn't have a belt routing sticker in the engine bay but I think yours should, mabey look for it on the fan shroud thats laying on the ground.

How urgent is replacing my brake pads at 15%? I have a 2002 Subaru Forrester. Where do you recommend I go?

My local Subaru dealer, upon doing my oil change (I'm at 72,000 miles) recommends 1,500 worth of repair including replacing the brake pads (I believe it), the power steering pump and the starter. I want a second opinion. I'm in Seattle/Lynnwood. Money is tight but I do want to be safe.How urgent is replacing my brake pads at 15%? I have a 2002 Subaru Forrester. Where do you recommend I go?
If money is tight, this is what I would recommend. Front brake pad are fairly easy to replace. If your not comfortable doing something like this, maybe a friend or relative could help. New pads only cost around $40 and its a 30 min job. Or take it to a local garage that has a good reputation. The dealer is usually the most expensive. What did they say about the power steering pump, is it just leaking a little? Try some stop leak first if that's the case. In most cases the pump will make a lot of noise before it goes out. Have an independent garage check it out first.

The starter will not be a safety issue. If it goes out you won't be able to start you car. Also a good independent garage could put in a rebuilt starter and save you some money.How urgent is replacing my brake pads at 15%? I have a 2002 Subaru Forrester. Where do you recommend I go?
Well, here, lets put it in a really easy to understand situation.



You like stopping your vehicle. It keeps you safe and alive.



Currently, your stopping ability, the ability that stops you from dying, or killing others, is down to only 15%.





Now, given that, do you really want to just put off the repairs? Is it urgent? I would think, for any logical person, that there's no question about it. Go get it fixed.



Power steering? Same thing. If you enjoy the ability to turn your car with any sort of reliability, get it fixed.How urgent is replacing my brake pads at 15%? I have a 2002 Subaru Forrester. Where do you recommend I go?
Les schwab!!How urgent is replacing my brake pads at 15%? I have a 2002 Subaru Forrester. Where do you recommend I go?
Go to www.cartalk.com and do a search on %26quot;Find Mechanic%26quot;. Click on the link that contains %26quot;Mechan-X Files%26quot;. Enter in your zip code to find a mechanic in your area. Mechanics are only referred by their customers. Read the mechanic's reviews and comments. If you have some time, listen to the car talk radio program on NPR. Best of luck.
  • chicken casserole recipe
  • domain name registration
  • 1977 Ford F150 starting problems.. And other Misc. questions?

    We have had this truck for a little over 2 years. Not driven it much... But have changed out the fuel tank for a brand new one, replaced the radiator with a better one (not new, but used) and have now just changed the power steering pump yesterday.



    My husband isn't really mechanically inclined when it comes to his truck yet.. but he's willing to learn! We got a chiltons manual (if thats how its spelled...) but he has lost it this last year.



    We have been having 1 new problem with the truck that we've never had before.. It has ALWAYS started up on a dime. Easily.. no problems.

    My husband recently drove it home about 80 miles the other day with it overheating every 20 minutes or so... (powersteering pump was out, so the belt wasn't attached to the fan to cool the engine/radiator) It got home fine..



    Now when he went and installed the powersteering pump, it wouldn't start. It turned and turned, but wouldn't fire. The spark plugs were changed out 2 years ago..



    We got it going by bypassing the solenoid... (he also tried charging the battery at the same time by jumping it with our van, so now I'm confused as to what made it start...)

    We hot wired it, basically and got it started.



    Let it run for about 20 minutes, and it was just fine! Drove it around the block no problem.



    BUT- after her turned it off, I told him to try to start it up with the key again.... and it started right up without the bypassing of the solenoid...WTF?

    Do you think the solenoid is going out..?? I told him he shouldnt have tried jumping the truck battery AND bypass the solenoid starting at the same time... because now we don't know if it was the battery, or the solenoid.



    ANY OPINIONS!??? We don't have any additional money to bring the thing into the shop right now, and would like to do any fixing on our own.



    OH YEAH.. and the wiring is crapily done. It could be something with that as well.. Im really not sure where HALF of the wires go in this thing. It's so badly done..1977 Ford F150 starting problems.. And other Misc. questions?
    My assumption from afar is the battery was low.



    If the truck starts easily, measure the voltage across the battery when you crank it and when it starts. The cranking volts should be higher than 9 volts and the running volts should be higher than 13.5 volts.



    If it isn't starting very well or at all with the key, but does bypassing the solenoid, the small wire on the solenoid should have battery voltage when the key is in the start position. If it does, solenoid is probably bad.1977 Ford F150 starting problems.. And other Misc. questions?
    Connected to your starter solinoid, on the passenger side inner fender is a small black wire, that has a lumo on it (fusable link) This wire under the lump can be and probably is corroded. change this wire, will probably fix the problem.1977 Ford F150 starting problems.. And other Misc. questions?
    you need to throw the chiltons manual in the garbage,get either a motors or haynes.

    then replace the battery.

    for the wiring, go to alldata.com1977 Ford F150 starting problems.. And other Misc. questions?
    this is easy clean your battery cables and your solenoid connections that should do it but just make sure you put everything back on the way it came dirty connections cause alot of resistance so cleaning them should do it

    2 Automotive Questions?

    I have 2 Questions- Number one is what would be a likely cause of a slow oil leak? about once every week and a half or 2 weeks i have to put a quart in, or the engine starts knocking. I was thinking it could be the valve cover gasket, but i just wanted a second opinion





    Number two- How difficult is it to replace a power steering pump and reservoir? The car is an 89 Grand prix. I have a fair amount of automotive ability, but i don't claim to be an expert by any means. I feel like i should be capable of changing the power steering pump, because i can't imagine that there's a whole lot too it, But i just want to make sure of what im getting into before i start ripping parts off of my car haha. So if someone can please tell me what all is involved in power steering pump replacement, i would greatly appreciate it. Thanks! 2 Automotive Questions?
    Question 1. depending on which engine you have it could be the valve cover/covers gaskets or the intake on the 3.1 engine which is very common.



    Question 2. Same as before it depends on the engine size but both are not that hard to change out but you will need a power steering pump pulley remover, the installer comes with the rebuilt pump.

    Automotive help please?

    I have 2 Questions- Number one is what would be a likely cause of a slow oil leak? about once every week and a half or 2 weeks i have to put a quart in, or the engine starts knocking. I was thinking it could be the valve cover gasket, but i just wanted a second opinion





    Number two- How difficult is it to replace a power steering pump and reservoir? The car is an 89 Grand prix. I have a fair amount of automotive ability, but i don't claim to be an expert by any means. I feel like i should be capable of changing the power steering pump, because i can't imagine that there's a whole lot too it, But i just want to make sure of what im getting into before i start ripping parts off of my car haha. So if someone can please tell me what all is involved in power steering pump replacement, i would greatly appreciate it. Thanks!Automotive help please?
    oil leak some are visible you just have to look around or maby your burning it a slight ring problem changing your plugs will show in burning

    the power steering pump looks easy...says it a lil easyer from the bottom in some cases...but heres a step by step...good luck



    http://www.autozone.com/az/cds/en_us/090

    I just found out my 95 LHS Chrysler, the body is rusted to H E double hockey sticks, what to do?

    I took my LHS 95 to change the broken trailing arm and power steering pump only to see on the lift the body is rusted more than I thought. The guy told me the bolts, if they break, the frame would be destroyed.



    Out of curiousity, how much would that cost to replace?? Should I just cut my loss and start saving for a different car?I just found out my 95 LHS Chrysler, the body is rusted to H E double hockey sticks, what to do?
    Start saving for a new car. I bought a few cars from MN. because they where cheaper then found out why. Plan on changing the car. Sorry.I just found out my 95 LHS Chrysler, the body is rusted to H E double hockey sticks, what to do?
    Yeppie, it is 15 years old. Way past its prime.Hopefully it will last long enough for you to get some down payment money saved up.

    Rust is difficult to repair so it is not worth attempting .I just found out my 95 LHS Chrysler, the body is rusted to H E double hockey sticks, what to do?
    Do the minimum repairs, save for another car, get in checked out before you buy it.

    Ok car question. When I accelerate the car is pulling against me?

    and it kind of rocks back and forth. It takes a bit of time to get to a higher speed and yesterday I was almost hit due to it.



    My husband says something is in the gas tank but it was doing this well before the last tank of gas only now it is a lot worse!



    I also, despite my husbands thoughts, know the slave cylinder is going out and the power steering pump needs to be replaced.



    How hard is this to do. I'm not alloweed a new car and I'm quite ticked off because we do not have the money to put this piece of **** kia in the shop.



    So can anyone tell me what can cause the car to pull against me and have issues with acceleration?



    And how hard it is to change the power steering pump and the slave cylinder?



    Yes he bought me this piece of **** when my mazada was totaled. It cost us a big 1200 and he spent some of the money on windows and inserts he inisted he could sell on line and get double our money back but not one has sold in 6 months! and to make it more fun I have 161 windows sitting on the property and we are now out the money.



    Anyone care to kick him for me?



    Thank you!Ok car question. When I accelerate the car is pulling against me?
    I commend you for calling your Kia a POS Kia. I admire that yu are not afraid of the truth, instead of delusional about Korean cars being the best vehicles in the world and such..........



    As for what is going on with the car, your Transmission may be dying. Maybe stuck in a gear?



    The rocking back and forth is interesting. If you mean front-to-back back and forth, it may be bucking, and be the transmisison refusing to shift in any type of reasonable, driveable way.



    Check the fluid on that. It may be so thirsty, it will drink up a whole quart.



    Some transmissions do just let excess fluid run out instead of causing an overfilled condition. Overfilling a transmission is bad, but not as bad as not having enough fluid. Oddly enough, overfilling will also cause your transmission to not work right. Be cautious, add a quarter quart at a time... this way you avoid that.Ok car question. When I accelerate the car is pulling against me?
    tell him to sell car online and get double your money !now for your problems slave cylinder is in the trans require removal of engine and no repetuable shop is gonna wanna do this job without replacing the clutch cost $400-$1200 depending where you live power steering pump another pump $35-$300 depending where you live if its new or used and kinda a pain to change you have my sympathy if your mechanically inclined you could change these items i would suggest you go to the autozone web page and look under repair info to get a better idea since you know what you or your husband is capable of good luckOk car question. When I accelerate the car is pulling against me?
    I'd love to do more than just kick him for you. And not being allowed to buy another vehicle???



    Sounds like you transmission is going out. You can have it rebuilt or try getting another. It may cost as much as the car itself. Changing a power steering pump is easy. Just can be a little messy for a rookie. Best of luck to you!Ok car question. When I accelerate the car is pulling against me?
    does your power steering work at all? I would guess the other answers on here are incorrect in saying it's the transmission because they are all assuming it's automatic. you said your slave is bad so it must be a standard shift right? well anyway my thought is under hard acceleration a front wheel drive car will try and pull the wheel out of your hands it's called torque steer. thats normal but if your power steering is out that will amplify the problem because you don't have the mechanical assist from the pump any more. so if you mash the gas the wheel will want to pull out of your hand and it will be very difficult to pull it back strait.

    as for how to replace it. it's not real hard but it isn't feasible for me to type it all out here so what I would suggest is go to the auto parts store and buy a $15 hanse manual for your car and that will have easy to follow step by step instructionsOk car question. When I accelerate the car is pulling against me?
    Did your husband raise the life insurance policy coverage on you recently?

    You sound like a high risk and with your %26quot;he won't let me attitude%26quot; probably not much fun to live with either.

    Get a job and buy your own ride.Ok car question. When I accelerate the car is pulling against me?
    you say it,s hard picking up speed? maybe the cat. converter is clogging up or it needs a complete tune-up. those cars are cheap made from day 1. it very well could be the transmission getting ready to go out.
  • use of mensovit plustablet
  • home theater
  • Ok car question. When I accelerate the car is pulling against me?

    and it kind of rocks back and forth. It takes a bit of time to get to a higher speed and yesterday I was almost hit due to it.



    My husband says something is in the gas tank but it was doing this well before the last tank of gas only now it is a lot worse!



    I also, despite my husbands thoughts, know the slave cylinder is going out and the power steering pump needs to be replaced.



    How hard is this to do. I'm not alloweed a new car and I'm quite ticked off because we do not have the money to put this piece of **** kia in the shop.



    So can anyone tell me what can cause the car to pull against me and have issues with acceleration?



    And how hard it is to change the power steering pump and the slave cylinder?



    Yes he bought me this piece of **** when my mazada was totaled. It cost us a big 1200 and he spent some of the money on windows and inserts he inisted he could sell on line and get double our money back but not one has sold in 6 months! and to make it more fun I have 161 windows sitting on the property and we are now out the money.



    Anyone care to kick him for me?



    Thank you!Ok car question. When I accelerate the car is pulling against me?
    I commend you for calling your Kia a POS Kia. I admire that yu are not afraid of the truth, instead of delusional about Korean cars being the best vehicles in the world and such..........



    As for what is going on with the car, your Transmission may be dying. Maybe stuck in a gear?



    The rocking back and forth is interesting. If you mean front-to-back back and forth, it may be bucking, and be the transmisison refusing to shift in any type of reasonable, driveable way.



    Check the fluid on that. It may be so thirsty, it will drink up a whole quart.



    Some transmissions do just let excess fluid run out instead of causing an overfilled condition. Overfilling a transmission is bad, but not as bad as not having enough fluid. Oddly enough, overfilling will also cause your transmission to not work right. Be cautious, add a quarter quart at a time... this way you avoid that.Ok car question. When I accelerate the car is pulling against me?
    tell him to sell car online and get double your money !now for your problems slave cylinder is in the trans require removal of engine and no repetuable shop is gonna wanna do this job without replacing the clutch cost $400-$1200 depending where you live power steering pump another pump $35-$300 depending where you live if its new or used and kinda a pain to change you have my sympathy if your mechanically inclined you could change these items i would suggest you go to the autozone web page and look under repair info to get a better idea since you know what you or your husband is capable of good luckOk car question. When I accelerate the car is pulling against me?
    I'd love to do more than just kick him for you. And not being allowed to buy another vehicle???



    Sounds like you transmission is going out. You can have it rebuilt or try getting another. It may cost as much as the car itself. Changing a power steering pump is easy. Just can be a little messy for a rookie. Best of luck to you!Ok car question. When I accelerate the car is pulling against me?
    does your power steering work at all? I would guess the other answers on here are incorrect in saying it's the transmission because they are all assuming it's automatic. you said your slave is bad so it must be a standard shift right? well anyway my thought is under hard acceleration a front wheel drive car will try and pull the wheel out of your hands it's called torque steer. thats normal but if your power steering is out that will amplify the problem because you don't have the mechanical assist from the pump any more. so if you mash the gas the wheel will want to pull out of your hand and it will be very difficult to pull it back strait.

    as for how to replace it. it's not real hard but it isn't feasible for me to type it all out here so what I would suggest is go to the auto parts store and buy a $15 hanse manual for your car and that will have easy to follow step by step instructionsOk car question. When I accelerate the car is pulling against me?
    Did your husband raise the life insurance policy coverage on you recently?

    You sound like a high risk and with your %26quot;he won't let me attitude%26quot; probably not much fun to live with either.

    Get a job and buy your own ride.Ok car question. When I accelerate the car is pulling against me?
    you say it,s hard picking up speed? maybe the cat. converter is clogging up or it needs a complete tune-up. those cars are cheap made from day 1. it very well could be the transmission getting ready to go out.

    My powere steering is chirping when i try and turn at low speeds ,how do i take off the power sterring pump?

    i was thinking it was the belt at first cause its frayed but i didnt think that should have caused that chirping problem,so im looking to drain it change the belt and see if that works firstMy powere steering is chirping when i try and turn at low speeds ,how do i take off the power sterring pump?
    it probably is the belt. try spraying the belt with a silicone spray or a belt dressing before you go pulling off the belt or the pump; if the chirp stops its only the belt. make sure the pump reservoir is filled to the full mark.



    i seriously doubt its the pump. pumps groan when they fail. if you want to drain the power steering pump, disconnect the low pressure return hose from the reservoir and put it into a suitable container such as a 2 liter soda bottle. then have someone start the engine while you hold the hose in the container. have them shut the engine off after about 10 seconds (the reservoir should be empty by then). then reconnect the hose and refill the reservoir. bleed the power steering by running the engine and turning the wheel full lock to one side and hold it there, then turn it to full lock in the opposite direction and hold it there. do this about 3 times then correct the level in the reservoir.



    as I said, I agree with you that its probably the belt and not the pump

    hope that helps

    My truck is making a screeching noise when i turn?

    It just started, i heard its the power steering pump. Anyone know how to change that?...and if it will hurt anything if i don't change it for a little bit?...its a 99 ford ranger 6cl 2wd.My truck is making a screeching noise when i turn?
    it should be ok for a little while but check the fluid level you might just be lowMy truck is making a screeching noise when i turn?
    it could be the pump, or you could have bad balljoints or bushings in you front end. like the first answer said, check the fluid level first, if it continues, check for power steering fluid in your driveway. if so, the pump's bad. if the pump doesn't leak and it keeps squeeking, try spraying wd40 on the steering bushings/balljoints. if the screeching stops, it was them, and they need replaced immediately, for safety reasons.My truck is making a screeching noise when i turn?
    Is your power steering unit leaking, check to see if there is any fluid in the reservoir, if no fluid is found add, start motor and turn steering from the left to the right several times till noise quits, if unit is bad, I would replace it as soon as possible.My truck is making a screeching noise when i turn?
    Turn off your engine and check the power fluid level and wiggle the power steering belt. The noise could be either a loose belt or low fluid.My truck is making a screeching noise when i turn?
    yes it is the pump check the fluid levelMy truck is making a screeching noise when i turn?
    check your aux belts..may just need tightening or replacing...

    How hard is it?

    to change the power steering pump in my 88 s-10. there is a massive leak. were else could the problem be?How hard is it?
    One of the hoses may have cracked/split/burst, the sector shaft seal may be leaking (it's the one in the bottom of the steering gearbox). That's about all there is in a power steering system. Make sure the pump is the problem. On most vehicles, the pump isn't hard to remove, it's the pully that is a bear to change. A special tool is usually required. Parts house may rent them.How hard is it?
    Pump or lines to it could be leaking. If you can change a water pump you can change this, but first you must locate the leak.How hard is it?
    Hoses -



    Check all the hoses - wash off the engine bay, run it and have a friend turn the wheel slow so you can see where it is leaking from.



    Hoses are a lot easier to swap out.



    But if it is the pump it should not be that bad of a task.How hard is it?
    not to hard...get the shop manual from advance or other ....best 15 dollars u can spend........that being said most leaks are bad hoses...very high pressure....[ i did have a PS pump reservoir crack in my 1984 s 10]How hard is it?
    Not sure how hard it would be, but you can check all your lines. If you have a section of rubber tubing then your best bet is to replace it and put two hose clamps on each end if it is a return line. If it's a high pressure line you probably have to buy a line that is fitted for it.How hard is it?
    It's not that difficult, assuming you have some automotive, or mechanical aptitude! If you've never worked on the truck before, go get a Chilton's, (thats what the main book was called when I did my own work), or other repair manual and follow directions!How hard is it?
    could be pump, lines or gear box.

    Power steering issues?

    99 Taurus with power steering issues. It sounds like the pump is going bad, but its only 2 years old, it has all the fluid. Hard to turn, tires wearing fast, noises when turning that sound like they are comeing from the pump.



    How do I know if I should just change the pump or one of the many other things that could be doing this?Power steering issues?
    did you check the air in the tires.also it might be the rack too. did you bleed the air out of the lines once you put the pump on?
  • dog
  • advice on raising children
  • What is the most u would pay for this car?

    okay so i have a 98 eclipse gs... i am gona post info about it and i want u guys to tell me wat is the most u would pay for this car.. lol please help

    ok so its a 98 eclipse gs 4cyliner 2.0 liter.. but the engine has a hole in it and spits out all da oil so the car is not drivable unless engine is swapped. recently to this car i had changed to transmission along with clutch and flywheel which cost 1300. changed the brakes and rotors 200 bucks, changed power steering pump along with a tensioner pulley and cam shaft pulley. i have a 3 inch exhaust on it. a 100 dollar air intake new batter, its fully loaded, leather moonroof, everything power but the driver window wont open(off track had it done but fell again) the car rann greatt but then the engine suddenly got a hole in it and it sucks.. lol it would work perfect with a new engine.. also it has a body kit but the front is broken and needs replacement and back bumper needs allignment.. so if u were gona buy how much would u pay? thanksWhat is the most u would pay for this car?
    First I realy don't think the GS had a 2.0ltr. Only the GS-T and the GSX. The other models had a slightly bigger chrysler motor in it. At least that is what I thought. Second. you will not get much for it so I would register on a Eclipse forum and part out the car. People need lots of little things you have there and I think you will make more a little at a time.What is the most u would pay for this car?
    Pull it to the nearest metal recycler...they'll pay you more than I would charge you to tow it off your lot.What is the most u would pay for this car?
    it would only be worth about 拢200What is the most u would pay for this car?
    Well in the area I live on a car like that is considered a junk, or parts car. Local scrappers give $50 for something like that.

    How do i change the drive belts on a nissan 300zx?

    For example how do i adjust the alternator and power steering pump on the engine to place a drive belt on it?How do i change the drive belts on a nissan 300zx?
    i have my mechanic do that and i pay him with the money get from selling thingsHow do i change the drive belts on a nissan 300zx?
    It a simple job. All the pulleys are on swivel or pivot bolts. You loosen them and your belts will gain enough slack to take them off. Go to www.twinturbo.net or www.300zxclub. com...These sites are dedicated z folks. They have tons of forums and faq sections. They even a illustrations on how to do a lot of jobs. I have a 91 TT, and I usually go there to get my answers or tech help.How do i change the drive belts on a nissan 300zx?
    You'll need a socket wrench with some sockets. American cars use inch system, Euros use metrics. Unsure on Japanese. Anyhow, on the pump, start loosening the mounting bolts until you hit one where you can move the pump. Move it in, and there'll be a lot less tension on the belt.



    It's pretty easy, i would save the pain in the azz stuff for the mechanics, this one is do-able.

    How do I change the belts on a 2002 Toyota Sienna V6?

    I was expecting to find a single serpentine belt with an automatic tensioner pulley. I have changed serpentine belts on many models with no problem. But this Sienna has two belts, not one. One belt drives the power steering pump. The second belt drives the alternator and A/C. I don't see a tensioner pulley on either belt. Do these belts work like old-fashioned V-belts belts where you tension them by loosening something (like the alternator) and then using a pry bar to tighten the belt? I can barely see the power steering pump so it looks pretty tight, I welcome advice from anybody who knows this model. Thanks.How do I change the belts on a 2002 Toyota Sienna V6?
    loosen the 14mm bolt on top of alternator. loosen 12mm bolt below alternator sitting sideways. adjust belt tension with 10mm bolt running through previous 12mm.

    loosen 12mm bolt on top of power steering pump. underneath vehicle loosen a 12mm bolt below p/s pump pull on belt to relieve tension, and pry carefully to increase tension.

    a bit of advice when reinstalling belts, the belt tension has to be just so, too tight and you will wreck the bearings in both pump and alt., too loose and the belts will squeal they have to be just right.

    1989 Honda Prelude 2.0 SI Power Steering Help?

    We've got a new power streering pump on the way for a 89 prelude si and I wanted to change out the power steering reservoir while I was at it. Does anybody know how universal these reservoirs are? There's one on ebay for a 1990 Honda/Acura (wasn't prelude specific) and I wasn't sure if that would work. I know they offered the 4 wheel steering in these years as well, which mine is not. Does that make a difference? Any help would be greatly appreciated!

    Oh, and I've got tons of bubbles in my power steering reservior. Does anybody know what that's all about?



    Thanks guys!1989 Honda Prelude 2.0 SI Power Steering Help?
    call honda.

    How hard and whats involved in changing rack n pinion steering on 1998 cavalier?

    hard to turn one way and not other...friend suggested that..hes mechanically inclined( i think)..thought it was the power steering pump at first....

    do i have to take the motor out to change or can it be change by taking the tires off and out from the sideHow hard and whats involved in changing rack n pinion steering on 1998 cavalier?
    not really to bad just type into search box



    how to replace rack n pinionHow hard and whats involved in changing rack n pinion steering on 1998 cavalier?
    you won't have to pull the engine, but you'll need a rack to work on



    it is not a gravy job! if the fluid is dirty, flushing out the fluid and putting new in can help, but if there is any metal in it, it will have to be replaced



    http://www.ehow.com/how_5315232_change-rHow hard and whats involved in changing rack n pinion steering on 1998 cavalier?
    You'll really get your best answer by looking in an auto repair manual for that model. If you want to try at the junk yard first, so you know if you can do it, you won't risk messing up your car as you learn.
  • ie
  • consultancy works
  •